V6FixIt.com

			Contact \| About \| FAQ

Welcome to V6FixIt,

This website is dedicated to all who own a 3.8 liter engine.

Some of the parts that you see on the 3.8 liter fail and break over time. Some of the GM parts you can not find at any retail auto parts store. If you decide to buy from the dealership they will charge you an outrages amount.. well that's where we come in. We manufacture the perfect parts that you need to get back on the road!

3.8 Liter Hose Kit

Our newest item is a replacement heater hose kit for the existing upper and lower heater hoses. When GM originally designed this heater hose connection it was designed with plastic parts that with heat and time will fail. Oddly enough the dealership does not sell these connectors, instead they offer a metal replacement that does not function well.

Here are the part numbers below for both metal fittings that we manufacture to replace the existing plastic parts:
12570305 - GM adapter alternative
24504476 - GM adapter alternative

When using the metal fittings from the dealer the fittings point the wrong direction from the firewall as seen in the photo below. So now you have all this extra rubber hose wrapping all around engine, going to the front then to the back. You have to make a huge loop with your hose so it doesn't kink.

They will charge you up to $190.00 for the original hose assembly. Not only that, but they currently don't carry them on the shelf. You have to place an order and it can take up to 2 weeks for the parts to come in while your vehicle is stranded.

We Have designed and have in stock a hose kit we call V6fix Kit with everything you need to make the proper professional looking and quality repairs. We will also sell any of the parts in the kit separately to meet your needs. View our products page and order yours today. Don't get ripped off from the dealership!

(Click to enlarge)

Our V6fix kit only takes about 15 min. to install after you have removed the original parts.

Here at www.V6FixIt.com we want to get you back on the road with a High Quality, Fast V6Fix for your GM Heater hose replacement as fast as possible without Overheating your pocket book!

Order yours today!

93-02 Camaro/Firebird Polyurethane Bump Stops!

V6 Camaro bump stops

V8 Camaro bump stops

These keep the axle of your car from hitting the frame rail under heavy shock to the rear wheels. You will definitely know it if you go over an epic speed bump! Not only that but when you are driving on the highway or a bridge, the small hills and bumps in the road will make the car sink down in the back and hit the frame. You may not feel it, but it happens.

The original bump stops on your vehicle are made from rubber which only last a certain amount of time (as you can see from the photo.) Although this may not be a necessary repair that keeps you off the road, it is a good investment. When the damaged bump stops do not work properly, it can cause damage to the rear axle of the car over time, thus causing future additional expensive repairs.

You can order these parts either in black or red. The bump stop kit comes with 2 polyurethane bump stops, 2 aluminum spacers, 2 bolts and 2 washers. The kit sells for $35.00 plus shipping.

The dealership will charge you $92.80 for both bump stops ($56.40 each), and takes approximately 2 weeks for them to come in. Order yours from V6FixIt!

(Click to enlarge)

(Click to enlarge)

Affiliates:

Link to us:

You are visitor #

Find us on Facebook: